Good Quality Stone Bush Hammering Machine - STONE BUSH HAMMER MACHINE – MACTOTEC

Short Description:

Product Detail

Product Tags

Feedback (2)

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Down The Hole Drill Bit, Stone Cutting Machine, Corner Stone Veneer Saws, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this industries and other industries.

Good Quality Stone Bush Hammering Machine - STONE BUSH HAMMER MACHINE – MACTOTEC Detail:

INTRODUCTION

This machine applies to the surface bush hammer processing for granite and marble. the bush hammer slabs are widely used on square or Pedestrian.

This machine is designed in very reasonable structure and easy operation, you will understand all the functions and operate it well in very short time.
Stone bush hammer machine adopt PLC control, continuous conveyor belt transmission as the same working mode as automatic polishing machine , makes it very high processing efficiency. 2 heads model processing capacity about 30-50㎡/h, 4 heads model processing capacity about 60-80㎡/h/.

Bush hammer machine for granite and marble with 2 or 4 heads and full automatic control system to guarantee the slabs to be processed into bush hammered surface in one time. The final surface after processed are natural, well-balanced and good looking.

The transmission speed of conveyor belt and swing frequency of bush hammer heads can be flexible adjusted as per your actual processing demand and stone characteristics, in this case can get better quality final products.

Each bush hammer heads can works independently, take 4 heads model for example, if you would like only 2 bush hammers work, you can only start the power of 2 heads and close the other 2.

The feeding end equipped with computer scanning device, so the bush hammer heads can automatically lift to avoid collision between heads and slabs.

The working mode can be switched between the manual and automatic mode, heads up and down can be controlled flexibly.

When processing antique surface, the NO. 3 and NO.4 heads can be changed with polishing brush, so that the NO. 1 and 2 grinding heads process bush hammer surface and NO. 3 and NO.4 heads process polishing work so as to finish the whole process successfully at one time. It effectively reduces cost and achieves higher efficiency.

Technical Data

Model		MTFZ-2-1000	MTFZ-4-1000	MTFZ-4-2000
Heads Quantity	pc	2	4	4
Main Motor Power	kw	3	3	3
Walking Motor Power	kw	1.5	1.5	1.5
Total Power	kw	8.6	16.5	17.2
Main Motor Speed	r/min	980	960	960
Power Supply	v/hz	380/50	380/50	380/50
Max. Processing Width	mm	1000	1000	2000
Overall Dimensions(LWH)	mm	340021501800	4350X2250X1800	4300X2800X1600
Weight	kg	2000	2680	3000
Capacity	（M2/H)	30~50	60-80	60-80

Product detail pictures:

Related Product Guide:

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Good Quality Stone Bush Hammering Machine - STONE BUSH HAMMER MACHINE – MACTOTEC , The product will supply to all over the world, such as: Netherlands, Ghana, Cambodia, We've been persisting in the business essence Quality First, Honoring Contracts and Standing by Reputations, providing customers with satisfying products and service. Friends both at home and abroad are warmly welcome to establish everlasting business relations with us.

Continuous Litchi Stone Bush Hammer Machine