High Quality Stone Filter Press Machine - Water Filtration System For Stone Shop – MACTOTEC

INTRODUCTION

Water filtration system is required in a variety of industries, The stone fabrication industry is also one of a beneficiary of water treatment technology.

Many fabrication shops use water during the fabrication to keep the temperature from getting too high on certain materials, such as:Granite,Marble,Quartz,Limestone,Onyx,Porcelains, The result of using water during fabrication is the presence of a mixture of stone dust and water. In this case, to make slurry separated into reusable water and mud is very necessary. Separating the stone dust from the water is often performed by using a filter press machine. this not only helps you meet local regulations, it can also significantly lower your water use and your water costs.

MTFL-450 is designed for recycling and treating water used in the stone fabrication shop. 100% recycled use of waste water , environment friendly and save money.

Processing capacity of this water treatment filter press around 6000L-7000L per hour.

Whole line including Mixing tank (blender ), filter presser, motor pump, dry solid collection hopper.

This model of water filter press machine is consist of 11 pieces of filter plates which adhere to each other to form chambers. liquid sludge is pumped between the filter plates so that solids are distributed evenly during the fill cycle. Solids accumulated on filter cloth, forming the filter cake. Liquids being filtered are discharged by drain pipes and put into recycling use . Once the chambers are full, the cycle is completed and the filter cakes are ready to be released. As the plates are shifted, the filter cake falls from each chamber into solids collection hopper below the press. The filtered dry solids meets typical landfill standards, it can usable as elements for concrete brick making. the pressure allows the liquid part to escape overcoming the filtering cloths. The liquid is clean water will be discharged for recycle use.

Technical Data

1.Mixing Tank(Blender)

Diameter :1000mm

Height: 1500mm

Motor power:1.5kw

2.Automatic filter presser

Processing capacity：6-7 m³ sewage per hour

Main motor power: 3kw

Filter pate : 11pcs

Dimension of filter plate: 450*450mm

3.MOTOR PUMP

Motor power: 11kw

Flow: 15m³per hour

4.Dry solids hopper