Stone machines such as block cutting machine, edge cutting machine , polishing machine, calibrating machine, etc. they are widely used in the market and are favored by customers in stone business, As one of the leading supplier of stone machines and tools,Xiamen Mactotec Equipment Co.,Ltd committed to provide full solution for customers, and we would be glad to share you the knowledge and experience about how to make better mechanical maintenance on your machines! The following tips will give you a detailed introduction:
First: Check the lubrication state of the machine
Regularly check and add grease for screw, guide rail and bearing every month; replace the grease in time; keep screw, guide rail, bearing and other moving parts in good lubrication condition to reduce the speed of mechanical wear. When replacing, it is necessary to clean off the old grease on the screw, guide rail and bearing.
Second: Check and adjust the mechanical accuracy.
In order to ensure the accuracy of the machine tool and reduce the shape and position errors between the moving parts, the backlash of the ball screw and the axial movement of the screw should be adjusted regularly.
Third: Always check whether the guide rails, machine tool protective covers, etc. are complete and effective.
If the protective cover is found to be damaged, it should be replaced in time, and the sand, water and dirt on the guide rail and screw should be cleaned in time, and then greased.
Last must not least, Every machine should be operated by professionals, especially like flaming machine, which uses oxygen and propane to burn slabs , it is kind of dangerous operation, it must be operated by professionals in strict accordance with the operating procedures for the safe use of oxygen and propane!
If any questions for machines purchasing or maintenance, please just feel free to contact MACTOTEC!
Post time: Jul-12-2022